bindkey -mevd bindkey -r in-string ... bindkey [ -a ] in-string [ command ] ... bindkey -s [ -a ] in-string out-string ... If one of the -e, -v, or -d options is given, reset the keymaps for emacs mode, vi mode, or the default mode, respectively; if the -m option is also given, allow the use of a meta key. If the -r option is given, remove any binding for each in-string. If the -s option is not specified, bind each in-string to a specified com- mand. If no command is specified, print the binding of in-string if it is bound, or return a nonzero exit code if it is not bound. If the -s option is specified, bind each in-string to each specified out-string. When in-string is typed, out-string will be pushed back and treated as input to the line editor. If the -a option is specified, bind the in-strings in the alternative keymap instead of the standard one. The alternative keymap is used in vi command mode. For either in-string or out-string, control characters may be specified in the form ^X, and the backslash may be used to introduce one of the following escape sequences: \a bell character \n linefeed (newline) \b backspace \t horizontal tab \v vertical tab \f form feed \r carriage return \e escape \nnn character code in octal \M-xxx character or escape sequence with meta bit set In all other cases, \ escapes the following character. Delete is written as `^?'. vi-backward-blank-word (unbound) (B) Move backward one word, where a word is defined as a series of non-blank characters. backward-char (^B ESC-[D) () Move backward one character. vi-backward-char () (h) Move backward one character, without changing lines. backward-word (ESC-B ESC-b) (unbound) Move to the beginning of the previous word. emacs-backward-word Move to the beginning of the previous word. vi-backward-word (unbound) (b) Move to the beginning of the previous word, vi-style. beginning-of-line (^A) (0) Move to the beginning of the line. If already at the beginning of the line, move to the beginning of the previous line, if any. vi-beginning-of-line Move to the beginning of the line, without changing lines. end-of-line (^E) Move to the end of the line. If already at the end of the line, move to the end of the next line, if any. vi-end-of-line (unbound) ($) Move to the end of the line. vi-forward-blank-word (unbound) (W) Move forward one word, where a word is defined as a series of non-blank characters. vi-forward-blank-word-end (unbound) (E) Move to the end of the current word, or, if at the end of the current word, to the end of the next word, where a word is defined as a series of non-blank characters. forward-char (^F ESC-[C) Move forward one character. vi-forward-char (unbound) (space l) Move forward one character. vi-find-next-char (^X^F) (f) Read a character from the keyboard, and move to the next occurrence of it in the line. vi-find-next-char-skip (unbound) (t) Read a character from the keyboard, and move to the position just before the next occurrence of it in the line. vi-find-prev-char (unbound) (F) Read a character from the keyboard, and move to the previous occurrence of it in the line. vi-find-prev-char-skip (unbound) (T) Read a character from the keyboard, and move to the position just after the previous occurrence of it in the line. vi-first-non-blank (unbound) (^) Move to the first non-blank character in the line. vi-forward-word (unbound) (w) Move forward one word, vi-style. forward-word (ESC-F ESC-f) (unbound) Move to the beginning of the next word. The editor's idea of a word is specified with the WORDCHARS parame- ter. emacs-forward-word Move to the end of the next word. vi-forward-word-end (unbound) (e) Move to the end of the next word. vi-goto-column (ESC-|) (|) Move to the column specified by the numeric argument. vi-goto-mark (unbound) (`) Move to the specified mark. vi-goto-mark-line (unbound) (') Move to beginning of the line containing the specified mark. vi-repeat-find (unbound) (;) Repeat the last vi-find command. vi-rev-repeat-find (unbound) (,) Repeat the last vi-find command in the opposite direc- tion. beginning-of-buffer-or-history (ESC-<) Move to the beginning of the buffer, or if already there, move to the first event in the history list. beginning-of-line-hist Move to the beginning of the line. If already at the beginning of the buffer, move to the previous history line. beginning-of-history Move to the first event in the history list. down-line-or-history (^N ESC-[B) (+ j) Move down a line in the buffer, or if already at the bottom line, move to the next event in the history list. down-line-or-search Move down a line in the buffer, or if already at the bottom line, search forward in the history for a line beginning with the first word in the buffer. down-history (unbound) (^N) Move to the next event in the history list. end-of-buffer-or-history (ESC->) Move to the end of the buffer, or if already there, move to the last event in the history list. end-of-line-hist Move to the end of the line. If already at the end of the buffer, move to the next history line. end-of-history Move to the last event in the history list. vi-fetch-history (unbound) (G) Fetch the history line specified by the numeric argu- ment. history-incremental-search-backward (^R ^Xr) Search backward incrementally for a specified string. The string may begin with `^' to anchor the search to the beginning of the line. history-incremental-search-forward (^Xs) Search forward incrementally for a specified string. The string may begin with `^' to anchor the search to the beginning of the line. history-search-backward (ESC-P ESC-p) (K) Search backward in the history for a line beginning with the first word in the buffer. vi-history-search-backward (unbound) (/) Search backward in the history for a specified string. The string may begin with `^' to anchor the search to the beginning of the line. history-search-forward (ESC-N ESC-n) (J) Search forward in the history for a line beginning with the first word in the buffer. vi-history-search-forward (unbound) (?) Search forward in the history for a specified string. The string may begin with `^' to anchor the search to the beginning of the line. infer-next-history (^X^N) Search in the history list for a line matching the current one and fetch the event following it. insert-last-word (ESC-_ ESC-.) Insert the last word from the previous history event at the cursor position. vi-repeat-search (unbound) (n) Repeat the last vi history search. vi-rev-repeat-search (unbound) (N) Repeat the last vi history search, but in reverse. toggle-literal-history (ESC-R ESC-r) Toggle between literal and lexical history. The default is lexical history unless the HISTLIT option is set. up-line-or-history (^P ESC-[A) (- k) Move up a line in the buffer, or if already at the top line, move to the previous event in the history list. up-line-or-search Move up a line in the buffer, or if already at the top line, search backward in the history for a line begin- ning with the first word in the buffer. up-history (unbound) (^P) Move to the previous event in the history list. vi-add-eol (unbound) (A) Move to the end of the line and enter insert mode. vi-add-next (unbound) (a) Move forward one character and enter insert mode. backward-delete-char (^H ^?) (^?) Delete the character behind the cursor. vi-backward-delete-char (unbound) (X) Delete the character behind the cursor, without chang- ing lines. backward-delete-word Delete the word behind the cursor. backward-kill-line Kill from the beginning of the line to the cursor posi- tion. backward-kill-word (^W ESC-^H ESC-^?) Kill the word behind the cursor. vi-backward-kill-word (unbound) (^W) Kill the word behind the cursor. capitalize-word (ESC-C ESC-c) Capitalize the current word and move past it. vi-change (unbound) (c) Read a movement command from the keyboard, and kill from the cursor position to the endpoint of the move- ment. Then enter insert mode. If the command is vi- change, kill the current line. vi-change-eol (unbound) (C) Kill to the end of the line and enter insert mode. vi-change-whole-line (unbound) (S s) Kill the current line and enter insert mode. copy-region-as-kill (ESC-W ESC-w) Copy the area from the cursor to the mark to the kill buffer. copy-prev-word (ESC-^_) Duplicate the word behind the cursor. vi-delete (unbound) (d) Read a movement command from the keyboard, and kill from the cursor position to the endpoint of the move- ment. If the command is vi-delete, kill the current line. delete-char (unbound) (x) Delete the character under the cursor. vi-delete-char (unbound) (x) Delete the character under the cursor. delete-word (ESC-D ESC-d) Delete the current word. down-case-word (ESC-L ESC-l) Convert the current word to all lowercase and move past it. kill-word Kill the current word. gosmacs-transpose-chars Exchange the two characters behind the cursor. vi-indent (unbound) (>) Indent a number of lines. vi-insert (unbound) (i) Enter insert mode. vi-insert-bol (unbound) (I) Move to the beginning of the line and enter insert mode. vi-join (^X^J) Join the current line with the next one. kill-line (^K) (D) Kill from the cursor to the end of the line. kill-region Kill from the cursor to the mark. kill-buffer (^X^U) (^U) Kill the entire buffer. kill-whole-line (^U) (unbound) Kill the current line. vi-match-bracket (^X^B) (%) Move to the bracket character (one of {}, (), or []) that matches the one under the cursor. vi-open-line-above (unbound) (O) Open a line above the cursor and enter insert mode. vi-open-line-below (unbound) (o) Open a line below the cursor and enter insert mode. vi-oper-swap-case Read a movement command from the keyboard, and swap the case of all characters from the cursor position to the endpoint of the movement. If the movement command is vi-oper-swap-case, swap the case of all characters on the current line. overwrite-mode (^X^O) Toggle between overwrite mode and insert mode. vi-put-after (unbound) (p) Insert the contents of the kill buffer after the cur- sor. quoted-insert (^V) Insert the next character typed into the buffer literally. quote-line (ESC-') Quote the current line; that is, put a ' character at the beginning and the end, and convert all ' characters to '\''. quote-region (ESC-") Quote the region from the cursor to the mark. vi-replace (unbound) (R) Enter overwrite mode. vi-repeat-change (unbound) (.) Repeat the last vi mode text modification. vi-replace-chars (unbound) (r) Replace the character under the cursor with a character read from the keyboard. self-insert (printable characters) Put a character in the buffer at the cursor position. self-insert-unmeta (ESC-^I ESC-^J ESC-^M) Put a character in the buffer after stripping the meta bit and converting ^M to ^J. vi-substitute (unbound) (s) Substitute the next character(s). vi-swap-case (unbound) (~) Swap the case of the character under the cursor and move past it. transpose-chars (^T) Exchange the two characters to the left of the cursor if at end of line, else exchange the character under the cursor with the character to the left. transpose-words (ESC-T ESC-t) Exchange the current word with the one before it. vi-unindent (unbound) (<) Unindent a number of lines. up-case-word (ESC-U ESC-u) Convert the current word to all caps and move past it. yank (^Y) (P) Insert the contents of the kill buffer at the cursor position. yank-pop (ESC-y) (unbound) Remove the text just yanked, rotate the kill-ring, and yank the new top. Only works following yank or yank- pop. vi-yank (unbound) (y) Read a movement command from the keyboard, and copy the region from the cursor position to the endpoint of the movement into the kill buffer. If the command is vi- yank, copy the current line. vi-yank-eol (unbound) (Y) Copy the region from the cursor position to the end of the line into the kill buffer. digit-argument (ESC-0..ESC-9) (0-9) Start a new numeric argument, or add to the current one. universal-argument Multiply the argument of the next command by 4. accept-and-menu-complete In a menu completion, insert the current completion into the buffer, and advance to the next possible com- pletion. complete-word (unbound) (\) Attempt completion on the current word. delete-char-or-list (^D) Delete the character under the cursor. If the cursor is at the end of the line, list possible completions for the current word. execute-named-cmd (ESC-x) Read the name of a editor command and execute it. execute-last-named-cmd (ESC-z) Redo the last function executed with execute-named-cmd. expand-cmd-path Expand the current command to its full pathname. expand-or-complete (TAB) (TAB ^X) Attempt shell expansion on the current word. If that fails, attempt completion. expand-history (ESC-space ESC-!) Perform history expansion on the edit buffer. expand-word (^X*) Attempt shell expansion on the current word. list-choices (ESC-^D) (^D =) List possible completions for the current word. list-expand (^Xg ^XG) (^G) List the expansion of the current word. magic-space Perform history expansion and insert a space into the buffer. This is intended to be bound to space. menu-complete Like complete-word, except that menu completion is used. See the MENU_COMPLETE option below. menu-expand-or-complete Like expand-or-complete, except that menu completion is used. reverse-menu-complete See the MENU_COMPLETE option below. accept-and-hold (ESC-A ESC-a) Push the contents of the buffer on the buffer stack and execute it. accept-and-infer-next-history Execute the contents of the buffer. Then search the history list for a line matching the current one and push the event following onto the buffer stack. accept-line (^J ^M) Execute the contents of the buffer. accept-line-and-down-history (^O) Execute the current line, and push the next history event on the the buffer stack. vi-cmd-mode (^X^V) (^[) Enter command mode; that is, use the alternate keymap. Yes, this is bound by default in emacs mode. vi-caps-lock-panic (unbound) (H K) Hang until any lowercase key is pressed. This is for vi users without the mental capacity to keep track of their caps lock key (like the author). clear-screen (^L ESC-^L) Clear the screen and redraw the prompt. exchange-point-and-mark (^X^X) Exchange the cursor position with the position of the mark. get-line (ESC-G ESC-g) Pop the top line off the buffer stack and insert it at the cursor position. pound-insert (unbound) (#) If there is no # character at the beginning of the current line, add one. If there is one, remove it. In either case, accept the current line. The INTERACTIVE_COMMENTS option must be set for this to have any usefulness. push-line (^Q ESC-Q ESC-q) Push the current buffer onto the buffer stack and clear the buffer. Next time the editor starts up, the buffer will be popped off the top of the buffer stack and loaded into the editing buffer. redisplay (unbound) (^R) Redisplays the edit buffer. run-help (ESC-H ESC-h) Push the buffer onto the buffer stack, and execute the command "run-help cmd", where cmd is the current com- mand. run-help is normally aliased to man. send-break (^C) Abort the parsing of the current line. vi-set-buffer (unbound) (") Specify a buffer to be used in the following command. vi-set-mark (unbound) (m) Set the specified mark at the cursor position. set-mark-command (^@) Set the mark at the cursor position. spell-word (ESC-$ ESC-S ESC-s) Attempt spelling correction on the current word. undefined-key Beep. undo (^_ ^X^U) (u) Incrementally undo the last text modification. which-command (ESC-?) Push the buffer onto the buffer stack, and execute the command "which-command cmd", where cmd is the current command. which-command is normally aliased to whence.